ZXDP-B S Series, 50 Litres Capacity

ZXDP-B S series direct heating incubators offer an economical incubation method to a variety of micro-organism cultures. 

As a standard feature, all incubators have a high-tech microprocessor controller that maintains accurate temperature control (PID) of the chamber in the range of ambient +5°C to 65°C. With an accuracy of ±0.1°C, a user-friendly sealed control panel allows easy digital setting and fast readout of time and temperature as well as an alarm signal if there is a deviation from set point parameters. The processor of our incubators can store up to 9 programs-18 steps-into a non- volatile memory. Programs can be used for running multiple "ramp and soak" cycles up to 99 times. Of course the incubators can also be used as a constant (one) temperature incubator.

Features

▶ P.I.D. microprocessor with auto tuning, ensures the precision of temperature control.

▶ Exterior cabinet made of #304 stainless steel with powder spray coated finishing with internal chamber made of #316 stainless steel, corrosion resistant.

▶ P.I.D. microprocessor with auto tuning, ensures the precision of temperature control. 

▶ LCD display with 0.1°C of resolution for indication of measured temperature and set temperature.

▶ Fully programmable through the keyboard (9 programs/18 steps).

▶ Forced-air circulation with low noise motor fan and balanced propeller provides uniformity of ±0.5°C@37°C.

▶ Audible and visible alarm on over temperature.

▶ Password protection against unauthorized access to all settings.

▶ Non-volatile memory retains preset parameters after an accidental power interruption.

▶ Thermal Insulation on all sides with glass wool.

▶ Outer door with lock prevent unauthorized access to the samples inside.

▶ Inner glass door provides complete visibility to the chamber.

▶ Standard 2pcs grids included.

▶ OD25mm access port for gas or moisture out or thermometer accommodation.